Summer is a great time to spend with your family, but it also means that you have to do more work on your car. Whether you’re handling the task yourself or hiring someone else to do it, plenty of things can go wrong when it comes to maintaining your car over the summer months.
Here are some tips on how to maintain your vehicle during the summer.
Table of contents
Check Your Coolant Level
It’s important to check your coolant level before every summer vacation. It’s easy to forget but can cause damage if not done regularly. If the coolant is low, add some distilled water to it and replace it with fresh coolant.
You should also check your hoses for cracks and leaks, which could cause overheating issues or an engine fire. Make sure that all hoses are securely attached to their fittings and that they’re not cracked or leaking. Also make sure that they’re not too long or too short, as this can cause problems with your vehicle’s cooling system.
If you have a leaky head gasket, do not drive until a qualified mechanic has repaired it. These repairs are very expensive and could result in serious damage if not done properly by someone who knows what he or she is doing.
Flush Your Radiator
Your radiator is a vital part of your engine and needs regular maintenance in order for it to function properly. You should flush out your radiator every 50-100 miles or so during the summer months to keep it working at peak performance levels all year long if you have Ford fe engine.
You can do this with a garden hose and some soap and water, but it’s better if you have access to a pressure washer. It’s important that you use the right kind of soap so that you don’t damage any components of the radiator itself.
If you’re using hot water from a hose, be sure to drain any excess water from the system before beginning. Then use your garden hose to connect it directly to one of the hoses that connect to your radiator. Turn on the water and let it run for about 10 seconds before turning off the hose and disconnecting it from both ends of the radiator.
You should repeat this process until all the water has been drained from inside your radiator. Once this has been done, use an air compressor or another pressure source to blow out any remaining debris inside your system.
Change Your Oil And Rotate The Filter
Changing your oil once every 3,000 miles is recommended but can be done up to 6,000 miles if needed (or more if you drive hard). Changing the filter once every 50-60 days is also recommended, though this can be done more frequently if needed (or less if you drive lightly). Make sure that you change both filters at the same time when doing this so they both get changed at once rather than one after another like they would have been if you only changed one filter at a time.
You can also change your engine oil and filter yourself if you wish by following these simple steps:
- 1. Remove the drain plug on the bottom of your car’s engine, then remove any debris in there with a shop vac before draining any excess oil out.
- 2. Wipe off all oil off the crankcase with paper towels or rags and remove any excess from around bolts and other areas such as valve covers and timing covers using a rag or towel.
- 3. Put some fresh engine oil into each cylinder with a funnel and ensure it’s clean before placing it back on top of its cylinder head liner/cap where it belongs!
Inspecting your car’s oil and filter regularly will help ensure that your car stays running smoothly for a long time.
Check for leaks
Leaks are one of the most common problems with your car. They can be small and hard to notice, but they can also have a significant impact on your vehicle’s performance, fuel economy and even safety, visit here to learn more.
If you notice a leak in any of your car’s parts, it’s important to fix it immediately before it worsens. Here’s how:
Check for leaks at idle and under acceleration. A leaking fuel line will cause a loss of power and poor gas mileage when accelerating. A leaking brake fluid line can cause vibrations or even stall out the car while driving.
Check all of your car’s hoses and fittings for leaks at least once a month. If there are any signs of leakage, fix them immediately before they worsen and cause even more damage!
Replace wiper blades
When it comes time for new wiper blades, replace them with ones that have more friction than those on your old windshield wipers. This will help reduce backfiring and stalling out of traffic when it rains or snows because they won’t slip as easily.
You can also choose a product that has a soft rubber outer edge to prevent damage to the windshield from scraping against it when you use your wipers.
The rubber edge also helps keep the wiper blade from getting caught in cracks in the windshield, which can cause damage over time and make for a bumpy ride when you’re driving.
Check tires regularly
One of the most important things you can do when it comes time to check tires regularly is to take them off your car and look at them closely. You want to ensure that there are no cracks in the tires, but you also want to ensure that they are still inflated properly. This will help you determine whether or not they need new tires. If they do need new tires, then you must take them off right away.
It is also important that you check the tread on your tires. If there are any cracks or bulges in the tread, it could indicate that something may be wrong with your tire. It is best to have this checked out by a professional immediately to fix everything as soon as possible.
If you notice any other problems with your tires, such as buckling or wobbling, then it is time for new ones! You should have this done as soon as possible so that nothing happens on the road and someone gets hurt or killed because of these issues getting worse over time.
Related Contents:
